Lessons learned in a decade: Medical-toxicological view of tattooing.

Tattooing has been part of the human culture for thousands of years, yet only in the past decades has it entered the mainstream of the society. With the rise in popularity, tattoos also gained attention among researchers, with the aim to better understand the health risks posed by their application. 'A medical-toxicological view of tattooing'-a work published in The Lancet almost a decade ago, resulted from the international collaboration of various experts in the field. Since then, much understanding has been achieved regarding adverse effects, treatment of complications, as well as their regulation for improving public health. Yet major knowledge gaps remain. This review article results from the Second International Conference on Tattoo Safety hosted by the German Federal Institute for Risk Assessment (BfR) and provides a glimpse from the medical-toxicological perspective, regulatory strategies and advances in the analysis of tattoo inks.

Less efficient skin penetration of the metal allergen Pd2+ compared to Ni2+ and Co2+ from patch test preparations.

BACKGROUND: Contrary to Ni2+- and Co2+-induced allergic contact dermatitis (ACD), reactions against Pd2+ are rare. However, Pd2+ activates a larger T cell fraction in vitro, suggesting an inefficient skin penetration. OBJECTIVES: This study compares Ni2+, Co2+ and Pd2+ skin penetration from commonly used diagnostic patch test preparations (PTPs) and aqueous metal salt solutions. METHODS: Using Franz diffusion cell assays, we applied the metals in PTPs (5% NiSO4, 1% CoCl2, 2% PdCl2 and 3% Na2PdCl4) and in solution to pigskin for 48 h, thereby mirroring the time frame of a patch test. The different compartments were analysed individually by inductively coupled plasma mass spectrometry. RESULTS: Metal ions were mainly retained in the upper stratum corneum layers. After application of PTPs, concentrations in the viable skin were lower for Pd2+ (1 and 7 µM) compared to Ni2+ and Co2+ (54 and 17 µM). CONCLUSIONS: Ni2+ and Co2+ penetrated the skin more efficiently than Pd2+ and thus may sensitize and elicit ACD more easily. This was observed for ions applied in petrolatum and aqueous solutions. We hypothesize that the differently charged metal complexes are responsible for the varying skin penetration behaviours.

A multi-technique approach for the quantification of 60 plasticizers and selected additives using GC- and LC-MS/MS and its application for beverages in the BfR MEAL study.

The development of multi-analyte methods is always challenging, especially when the target compounds derive from many different substance classes. We present an approach to analyze up to 60 additives - mainly plasticizer - including 28 phthalates and 32 further compounds such as sebacates, adipates, citrates, fatty acid amides, among others. Our multi-analyte multi-technique approach combines a single sample preparation step with one GC-MS/MS and two LC-MS/MS quantification methods. We demonstrate the applicability for beverages by a full validation in tomato juice matrix and determining the recoveries in apple juice, mulled wine, and spirits. The approach features good reproducibilities and high precisions with limits of quantification in the low µg·kg-1 food range, enabling the method to be applied for enforcement and especially for exposure investigations. In course of the BfR MEAL study, 16 pooled beverage samples were examined and - if at all - analytes were found only in very low concentrations.

Levels of nicotine and tobacco-specific nitrosamines in oral nicotine pouches.

BACKGROUND: Nicotine pouches without tobacco are new products that deliver nicotine into the body via the oral mucosa. There is a lack of independent research on the chemical composition and product characteristics of these products, contributing to uncertainties regarding product regulation. This study sought to address knowledge gaps by assessing levels of nicotine and screening for tobacco-specific nitrosamines (TSNAs) in a sample of these products. METHODS: Nicotine pouches (n=44) and nicotine-free pouches (n=2) from 20 different manufacturers were analysed regarding their contents of nicotine and TSNAs by gas chromatography with flame ionisation and liquid chromatography-tandem mass spectrometry, respectively. Product labelling and pH values of aqueous extracts were determined. RESULTS: Nicotine contents of products ranged from 1.79 to 47.5 mg/pouch; median product weight, pH, and proportion of free-base nicotine were 0.643 g, 8.8, and 86%, respectively. A clear labelling of the nicotine content was missing on 29 products and nicotine strength descriptions were ambiguous. TSNAs were detected in 26 products, with a maximum of 13 ng N-nitrosonornicotine/pouch. CONCLUSION: Although nicotine pouches may potentially be a reduced risk alternative for cigarette smokers or users of some other oral tobacco products, nicotine contents of some pouches were alarmingly high. Presence of carcinogenic TSNAs in the nicotine pouches is of serious concern. Better manufacturing processes and quality control standards should be implemented. Labels of nicotine strength on most products are misleading. A strict regulation regarding nicotine contents and its labelling would be advisable.

Harmonization Risks and Rewards: Nano-QSAR for Agricultural Nanomaterials.

This comprehensive review explores the emerging landscape of Nano-QSAR (quantitative structure-activity relationship) for assessing the risk and potency of nanomaterials in agricultural settings. The paper begins with an introduction to Nano-QSAR, providing background and rationale, and explicitly states the hypotheses guiding the review. The study navigates through various dimensions of nanomaterial applications in agriculture, encompassing their diverse properties, types, and associated challenges. Delving into the principles of QSAR in nanotoxicology, this article elucidates its application in evaluating the safety of nanomaterials, while addressing the unique limitations posed by these materials. The narrative then transitions to the progression of Nano-QSAR in the context of agricultural nanomaterials, exemplified by insightful case studies that highlight both the strengths and the limitations inherent in this methodology. Emerging prospects and hurdles tied to Nano-QSAR in agriculture are rigorously examined, casting light on important pathways forward, existing constraints, and avenues for research enhancement. Culminating in a synthesis of key insights, the review underscores the significance of Nano-QSAR in shaping the future of nanoenabled agriculture. It provides strategic guidance to steer forthcoming research endeavors in this dynamic field.

The nuclear entry of the aryl hydrocarbon receptor (AHR) relies on the first nuclear localization signal and can be negatively regulated through IMPα/ß specific inhibitors.

The human aryl hydrocarbon receptor (AHR) undergoes continuous shuttling between nucleus and cytoplasm. Binding to exogenous or endogenous ligands promotes its rapid nuclear import. The proposed mechanism for the ligand-dependent import is based on exposing the bipartite nuclear localisation signal (NLS) to members of the importin (IMP) superfamily. Among this, the molecular interactions involved in the basal import still need to be clarified. Utilizing fluorescently fused AHR variants, we recapitulated and characterized AHR localization and nucleo-cytoplasmic shuttling in living cells. Analysis of AHR variants carrying NLS point mutations demonstrated a mandatory role of first (13RKRRK17) and second (37KR-R40) NLS segments on the basal import of AHR. Further experiments indicated that ligand-induced import is mainly regulated through the first NLS, while the second NLS is supportive but not essential. Additionally, applying IMPα/ß specific inhibitors, ivermectin (IVM) and importazole (IPZ), slowed down the ligand-induced import and, correspondingly, decreased the basal nuclear accumulation of the receptor. In conclusion, our data show that ligand-induced and basal nuclear entry of AHR rely on the same mechanism but are controlled uniquely by the two NLS components.

ROS generating BODIPY loaded nanoparticles for photodynamic eradication of biofilms.

Bacterial biofilms can pose a serious health risk to humans and are less susceptible to antibiotics and disinfection than planktonic bacteria. Here, a novel method for biofilm eradication based on antimicrobial photodynamic therapy utilizing a nanoparticle in conjunction with a BODIPY derivative as photosensitizer was developed. Reactive oxygen species are generated upon illumination with visible light and lead to a strong, controllable and persistent eradication of both planktonic bacteria and biofilms. One of the biggest challenges in biofilm eradication is the penetration of the antimicrobial agent into the biofilm and its matrix. A biocompatible hydrophilic nanoparticle was utilized as a delivery system for the hydrophobic BODIPY dye and enabled its accumulation within the biofilm. This key feature of delivering the antimicrobial agent to the site of action where it is activated resulted in effective eradication of all tested biofilms. Here, 3 bacterial species that commonly form clinically relevant pathogenic biofilms were selected: Escherichia coli, Staphylococcus aureus and Streptococcus mutans. The development of this antimicrobial photodynamic therapy tool for biofilm eradication takes a promising step towards new methods for the much needed treatment of pathogenic biofilms.

4-Aminobenzoic acid, 2-phenoxyethanol and iodine used as tracers in a short-term in vivo-kinetics study for tattoo ink ingredients: Mass spectrometry method development and validation.

Tattoos have been gaining popularity in recent years, leading to a growing interest in researching tattoo inks and the tattooing process itself. Since the exposure to soluble tattoo ink ingredients has not yet been investigated, we here present the method validation for a short-term biokinetics study on soluble tattoo ink ingredients. The three tracers 4-aminobenzoic acid (PABA), 2-phenoxyethanol (PEtOH) and iodine will be added to commercially available tattoo inks, which will subsequently be used on healthy study participants. Following the tattooing process, blood and urine will be sampled at specific time points and analysed for these tracers. For this purpose, a method using liquid chromatography separation coupled to a quadrupole time-of-flight mass spectrometer (LC-QTOF-MS) in positive and negative ESI mode for the quantification of PABA, PEtOH and selected metabolites and an inductively-coupled plasma (ICP)-MS method for the determination of iodine were developed and validated. For LC-QTOF-MS analysis, the most applicable additives for LC eluents (0.01 % formic acid for positive and 0.005 % acetic acid for negative mode) were identified. Protein precipitation with acetonitrile was chosen for sample preparation. The methods were validated for selectivity, specificity, carryover, linearity, limit of detection (LOD) and quantification (LOQ), matrix effects, accuracy and precision, stability under different conditions and dilution integrity according to national and international guidelines with an allowed maximum variation of ±15 %. The LC-QTOF-MS method met the imposed guideline criteria for most parameters, however, some metabolites showed strong matrix effects. Validation of the ICP-MS method revealed that the KED-H2 collision mode is superior to the standard analysis mode due to enhanced method accuracy. The methods were validated for the relevant matrices plasma, urine, tattoo ink and tattoo consumables and proved to be applicable for the main target substances in the short-term biokinetics study. A proof-of-concept study showed successful quantification of iodine and PABA metabolites. The PEtOH metabolite was also quantified, but showed strong matrix effects in urine. Therefore standard addition was selected as an alternative quantification method.

Basic concepts of mixture toxicity and relevance for risk evaluation and regulation.

Exposure to multiple substances is a challenge for risk evaluation. Currently, there is an ongoing debate if generic "mixture assessment/allocation factors" (MAF) should be introduced to increase public health protection. Here, we explore concepts of mixture toxicity and the potential influence of mixture regulation concepts for human health protection. Based on this analysis, we provide recommendations for research and risk assessment. One of the concepts of mixture toxicity is additivity. Substances may act additively by affecting the same molecular mechanism within a common target cell, for example, dioxin-like substances. In a second concept, an "enhancer substance" may act by increasing the target site concentration and aggravating the adverse effect of a "driver substance". For both concepts, adequate risk management of individual substances can reliably prevent adverse effects to humans. Furthermore, we discuss the hypothesis that the large number of substances to which humans are exposed at very low and individually safe doses may interact to cause adverse effects. This commentary identifies knowledge gaps, such as the lack of a comprehensive overview of substances regulated under different silos, including food, environmentally and occupationally relevant substances, the absence of reliable human exposure data and the missing accessibility of ratios of current human exposure to threshold values, which are considered safe for individual substances. Moreover, a comprehensive overview of the molecular mechanisms and most susceptible target cells is required. We conclude that, currently, there is no scientific evidence supporting the need for a generic MAF. Rather, we recommend taking more specific measures, which focus on compounds with relatively small ratios between human exposure and doses, at which adverse effects can be expected.

New approach methodologies in human regulatory toxicology - Not if, but how and when!

The predominantly animal-centric approach of chemical safety assessment has increasingly come under pressure. Society is questioning overall performance, sustainability, continued relevance for human health risk assessment and ethics of this system, demanding a change of paradigm. At the same time, the scientific toolbox used for risk assessment is continuously enriched by the development of "New Approach Methodologies" (NAMs). While this term does not define the age or the state of readiness of the innovation, it covers a wide range of methods, including quantitative structure-activity relationship (QSAR) predictions, high-throughput screening (HTS) bioassays, omics applications, cell cultures, organoids, microphysiological systems (MPS), machine learning models and artificial intelligence (AI). In addition to promising faster and more efficient toxicity testing, NAMs have the potential to fundamentally transform today's regulatory work by allowing more human-relevant decision-making in terms of both hazard and exposure assessment. Yet, several obstacles hamper a broader application of NAMs in current regulatory risk assessment. Constraints in addressing repeated-dose toxicity, with particular reference to the chronic toxicity, and hesitance from relevant stakeholders, are major challenges for the implementation of NAMs in a broader context. Moreover, issues regarding predictivity, reproducibility and quantification need to be addressed and regulatory and legislative frameworks need to be adapted to NAMs. The conceptual perspective presented here has its focus on hazard assessment and is grounded on the main findings and conclusions from a symposium and workshop held in Berlin in November 2021. It intends to provide further insights into how NAMs can be gradually integrated into chemical risk assessment aimed at protection of human health, until eventually the current paradigm is replaced by an animal-free "Next Generation Risk Assessment" (NGRA).

Oral nicotine pouches with an aftertaste? Part 2: in vitro toxicity in human gingival fibroblasts.

Nicotine pouches contain fewer characteristic toxicants than conventional tobacco products. However, the associated risks in terms of toxicity and addiction potential are still unclear. Therefore, endpoints of toxicity and contents of flavoring substances were investigated in this study. The in vitro toxicity of five different nicotine pouches and the reference snus CRP1.1 were studied in human gingival fibroblasts (HGF-1). Cells were exposed to product extracts (nicotine contents: 0.03-1.34 mg/mL) and sampled at different time points. Cytotoxicity, total cellular reactive oxygen species (ROS) levels, and changes in the expression levels of inflammatory and oxidative stress genes were assessed. Flavor compounds used in the nicotine pouches were identified by GC-MS. Cytotoxicity was observed in two nicotine pouches. Gene expression of interleukin 6 (IL6) and heme oxygenase 1 (HMOX1) was upregulated by one and three pouches, respectively. ROS production was either increased or decreased, by one pouch each. CRP1.1 caused an upregulation of IL6 and elevated ROS production. Toxicity was not directly dependent on nicotine concentration and osmolarity. A total of 56 flavorings were detected in the five nicotine pouches. Seven flavorings were classified according to the harmonized hazard classification system as laid down in the European Classification, Labelling and Packaging regulation. Nine flavorings are known cytotoxins. Cytotoxicity, inflammation, and oxidative stress responses indicate that adverse effects such as local lesions in the buccal mucosa may occur after chronic product use. In conclusion, flavorings used in nicotine pouches likely contribute to the toxicity of nicotine pouches.

Migration of polycyclic aromatic hydrocarbons from a polymer surrogate through the stratum corneum layer of the skin.

In this study, we determined partition (Ksc/m) and diffusion (Dsc) coefficients of five different polycyclic aromatic hydrocarbons (PAH) migrating from squalane into and through the stratum corneum (s.c.) layer of the skin. Carcinogenic PAH have previously been detected in numerous polymer-based consumer products, especially those dyed with carbon black. Upon dermal contact with these products, PAH may penetrate into and through the viable layers of the skin by passing the s.c. and thus may become bioavailable. Squalane, a frequent ingredient in cosmetics, has also been used as a polymer surrogate matrix in previous studies. Ksc/m and Dsc are relevant parameters for risk assessment because they allow estimating the potential of a substance to become bioavailable upon dermal exposure. We developed an analytical method involving incubation of pigskin with naphthalene, anthracene, pyrene, benzo[a]pyrene and dibenzo[a,h]pyrene in Franz diffusion cell assays under quasi-infinite dose conditions. PAH were subsequently quantified within individual s.c. layers by gas chromatography coupled to tandem mass spectrometry. The resulting PAH depth profiles in the s.c. were fitted to a solution of Fick's second law of diffusion, yielding Ksc/m and Dsc. The decadic logarithm logKsc/m ranged from -0.43 to +0.69 and showed a trend to higher values for PAH with higher molecular masses. Dsc, on the other hand, was similar for the four higher molecular mass PAH but about 4.6-fold lower than for naphthalene. Moreover, our data suggests that the s.c./viable epidermis boundary layer represents the most relevant barrier for the skin penetration of higher molecular mass PAH. Finally, we empirically derived a mathematical description of the concentration depth profiles that better fits our data. We correlated the resulting parameters to substance specific constants such as the logarithmic octanol-water partition coefficient logP, Ksc/m and the removal rate at the s.c./viable epidermis boundary layer.

Oral nicotine pouches with an aftertaste? Part 1: screening and initial toxicological assessment of flavorings and other ingredients.

Nicotine pouches are oral products that deliver nicotine without containing tobacco. Previous studies mainly focused on the determination of known tobacco toxicants, while yet no untargeted analysis has been published on unknown constituents, possibly contributing to toxicity. Furthermore, additives might enhance product attractiveness. We therefore performed an aroma screening with 48 different nicotine-containing and two nicotine-free pouches using gas chromatography coupled to mass spectrometry, following acidic and basic liquid-liquid extraction. For toxicological assessment of identified substances, European and international classifications for chemical and food safety were consulted. Further, ingredients listed on product packages were counted and grouped by function. Most abundant ingredients comprised sweeteners, aroma substances, humectants, fillers, and acidity regulators. 186 substances were identified. For some substances, acceptable daily intake limits set by European Food Safety Agency (EFSA) and Joint FAO/WHO Expert Committee on Food Additives are likely exceeded by moderate pouch consumption. Eight hazardous substances are classified according to the European CLP regulation. Thirteen substances were not authorized as food flavorings by EFSA, among them impurities such as myosmine and ledol. Three substances were classified by International Agency for Research on Cancer as possibly carcinogenic to humans. The two nicotine-free pouches contain pharmacologically active ingredients such as ashwagandha extract and caffeine. The presence of potentially harmful substances may point to the need for regulation of additives in nicotine-containing and nicotine-free pouches that could be based on provisions for food additives. For sure, additives may not pretend positive health effects in case the product is used.

Two Different Heated Tobacco Products vs. Cigarettes: Comparison of Nicotine Delivery and Subjective Effects in Experienced Users.

Heated tobacco products (HTPs) produce aerosol using a different mechanism than tobacco cigarettes, leading to lower emissions of some harmful substances, but also of nicotine as reported by some independent studies. Lower nicotine delivery could lead to compensatory puffing when product use does not sufficiently satisfy cravings. Thus, this three-arm crossover study was conducted to characterize the potential of two different HTPs to deliver nicotine and satisfy cravings compared with conventional cigarettes in users who had already switched to HTPs. Fifteen active, non-exclusive HTP users consumed the study products according to a pre-directed puffing protocol. At predetermined time points, venous blood was sampled and the subjective effects of consumption were assessed. Nicotine delivery by both HTPs was comparable, but significantly lower than that by conventional cigarettes, suggesting a lower addictive potential. Cravings were reduced by all products, with no statistically significant differences between them, despite the different nicotine deliveries. This indicated that HTPs do not necessarily need high nicotine deliveries with high addictive potential, as are characteristic of tobacco cigarettes. These results were followed up on with an ad libitum use study.

Usage Pattern and Nicotine Delivery during Ad Libitum Consumption of Pod E-Cigarettes and Heated Tobacco Products.

Many different nicotine delivery products, such as e-cigarettes (e-cigs) or heated tobacco products (HTPs), are available on the market. To better understand these products, it is crucial to learn how consumers use them and how much nicotine they deliver. Therefore, a pod e-cig, an HTP, and a conventional cigarette (CC) were each used by 15 experienced users of the respective product category for 90 min without special use instructions ("ad libitum"). Sessions were video recorded to analyze usage patterns and puff topography. At defined time points, blood was sampled to determine nicotine concentrations, and subjective effects were inquired about using questionnaires. During the study period, the CC and HTP groups averaged the same number of consumption units (both 4.2 units). In the pod e-cig group, the highest number of puffs was taken (pod e-cig 71.9; HTP: 52.2; CC: 42.3 puffs) with the most extended mean puff duration (pod e-cig: 2.8 s; HTP: 1.9 s; CC: 1.8 s). Pod e-cigs were predominantly used with single puffs or in short clusters of 2-5 puffs. The maximum plasma nicotine concentration was highest for CCs, followed by HTPs, and then pod e-cigs with 24.0, 17.7, and 8.0 ng/mL, respectively. Craving was reduced by all products. The results suggest that the high nicotine delivery known for tobacco-containing products (CCs and HTPs) may not be needed for non-tobacco-containing products (pod e-cigs) to satisfy cravings in experienced users.

Data on ADME parameters of bisphenol A and its metabolites for use in physiologically based pharmacokinetic modelling.

The paper presents the collection of physicochemical parameters of bisphenol A (BPA) and its sulfate (BPAS) and glucuronide (BPAG) conjugates, accompanied by data characterizing their absorption, distribution, metabolism and excretion (ADME) behavior following oral administration of BPA. The data were collected from open literature sources and publicly available databases. Additionally, data calculated by using the MarvinSketch 18.30.0 software or predicted by relevant QSAR models built in Simcyp® Simulator were also used. All data were analysed and are fit for purpose if necessary to ensure a reliable prediction of pharmacokinetics of BPA and its conjugates. The data selection process and reasoning for fitting is provided to allow critical assessment and to ensure data transparency. Finally, the sensitivity analysis was performed to assess the influence of the selected parameters on the PBPK model predictions.

Polymer Translocation and Nanopore Sequencing: A Review of Advances and Challenges.

Various biological processes involve the translocation of macromolecules across nanopores; these pores are basically protein channels embedded in membranes. Understanding the mechanism of translocation is crucial to a range of technological applications, including DNA sequencing, single molecule detection, and controlled drug delivery. In this spirit, numerous efforts have been made to develop polymer translocation-based sequencing devices, these efforts include findings and insights from theoretical modeling, simulations, and experimental studies. As much as the past and ongoing studies have added to the knowledge, the practical realization of low-cost, high-throughput sequencing devices, however, has still not been realized. There are challenges, the foremost of which is controlling the speed of translocation at the single monomer level, which remain to be addressed in order to use polymer translocation-based methods for sensing applications. In this article, we review the recent studies aimed at developing control over the dynamics of polymer translocation through nanopores.

Integrative toxicogenomics: Advancing precision medicine and toxicology through artificial intelligence and OMICs technology.

More information about a person's genetic makeup, drug response, multi-omics response, and genomic response is now available leading to a gradual shift towards personalized treatment. Additionally, the promotion of non-animal testing has fueled the computational toxicogenomics as a pivotal part of the next-gen risk assessment paradigm. Artificial Intelligence (AI) has the potential to provid new ways analyzing the patient data and making predictions about treatment outcomes or toxicity. As personalized medicine and toxicogenomics involve huge data processing, AI can expedite this process by providing powerful data processing, analysis, and interpretation algorithms. AI can process and integrate a multitude of data including genome data, patient records, clinical data and identify patterns to derive predictive models anticipating clinical outcomes and assessing the risk of any personalized medicine approaches. In this article, we have studied the current trends and future perspectives in personalized medicine & toxicology, the role of toxicogenomics in connecting the two fields, and the impact of AI on personalized medicine & toxicology. In this work, we also study the key challenges and limitations in personalized medicine, toxicogenomics, and AI in order to fully realize their potential.

Artificial intelligence and machine learning disciplines with the potential to improve the nanotoxicology and nanomedicine fields: a comprehensive review.

The use of nanomaterials in medicine depends largely on nanotoxicological evaluation in order to ensure safe application on living organisms. Artificial intelligence (AI) and machine learning (MI) can be used to analyze and interpret large amounts of data in the field of toxicology, such as data from toxicological databases and high-content image-based screening data. Physiologically based pharmacokinetic (PBPK) models and nano-quantitative structure-activity relationship (QSAR) models can be used to predict the behavior and toxic effects of nanomaterials, respectively. PBPK and Nano-QSAR are prominent ML tool for harmful event analysis that is used to understand the mechanisms by which chemical compounds can cause toxic effects, while toxicogenomics is the study of the genetic basis of toxic responses in living organisms. Despite the potential of these methods, there are still many challenges and uncertainties that need to be addressed in the field. In this review, we provide an overview of artificial intelligence (AI) and machine learning (ML) techniques in nanomedicine and nanotoxicology to better understand the potential toxic effects of these materials at the nanoscale.